VLSI Design (Diploma)

CMOS technology, VLSI design flow, HDL basics and FPGA.

6 महीनेअवधि 5Chapters25टॉपिक

अभी पूछताछ करें

सिलेबस · पाठ्यक्रम

Download PDF

01Unit 1: Introduction to VLSI Design 5 टॉपिक

Evolution: SSI, MSI, LSI, VLSI
Moore's law
Design styles: full custom, standard cell, gate array, FPGA
VLSI design flow and Y-chart
ASIC vs FPGA

02Unit 2: MOS Transistor and CMOS Technology 6 टॉपिक

NMOS and PMOS transistors, threshold voltage
CMOS inverter and transfer characteristic
Noise margin
Static and dynamic power dissipation
Fabrication: oxidation, photolithography, diffusion, ion implantation, metallisation
n-well CMOS process

03Unit 3: CMOS Logic Circuits and Layout 5 टॉपिक

CMOS NAND and NOR gates
Complex gates
Transmission gate
Stick diagrams
Lambda-based design rules and layout

04Unit 4: HDL Basics (Verilog) 5 टॉपिक

Verilog module, ports and data types (wire, reg)
Gate level modelling
Dataflow modelling with assign
Behavioural modelling with always
Test bench, simulation and synthesis

05Unit 5: Programmable Logic Devices and FPGA 4 टॉपिक

PROM, PLA and PAL
CPLD
FPGA architecture: CLB, LUT, IOB, interconnect
FPGA design flow and tools

परिचय

आप यह कर पाएँगे

Explain the evolution of ICs, Moore's law, design styles and the VLSI design flow
Explain MOS transistor operation, the CMOS inverter and CMOS power dissipation
Outline CMOS fabrication steps (n-well process)
Draw CMOS NAND, NOR and transmission gate circuits, stick diagrams and apply lambda rules
Write simple Verilog models in gate, dataflow and behavioural styles with a test bench
Compare PLA, PAL, CPLD and FPGA and describe the FPGA design flow

यह किसके लिए है

Diploma Electronics Engineering students of Semester 6 (BTEUP)
Polytechnic students of other boards studying the same subject who want unit-wise coaching

आपको क्या चाहिए

Digital Electronics and Electronic Devices of earlier semesters

सवाल

Which syllabus does the VLSI Design course follow?

It follows the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus for VLSI Design (Electronics Engineering, Semester 6). If your own board's or institute's syllabus differs, the centre follows your own syllabus.

Will this help in the semester examination?

Yes. Teaching is unit-wise as per the BTEUP scheme, with previous-year question practice, MCQ tests and doubt sessions before the semester exam.

Which software is used for Verilog?

Free simulators such as Icarus Verilog / EDA Playground, and Xilinx Vivado or Intel Quartus for FPGA flow where available.