Materials Testing Lab (B.Tech Mechanical)

Tensile, hardness, impact and metallography tests on engineering materials.

6 महीनेअवधि 5Chapters20टॉपिक

अभी पूछताछ करें

सिलेबस · पाठ्यक्रम

Download PDF

01Tension and Compression Tests 4 टॉपिक

Tensile test on mild steel using UTM
Yield point, ultimate strength, percentage elongation and reduction in area
Compression test on cast iron and wood
Double shear test

02Hardness Tests 4 टॉपिक

Brinell hardness test
Rockwell hardness test (B and C scales)
Vickers hardness test
Comparison of hardness of different metals

03Impact and Fatigue Tests 4 टॉपिक

Izod impact test
Charpy impact test
Fatigue test on rotating beam machine
S-N curve and endurance limit

04Torsion and Spring Tests 4 टॉपिक

Torsion test on mild steel rod
Modulus of rigidity from torque-twist graph
Stiffness of a close-coiled helical spring
Deflection test on a beam

05Metallography and Heat Treatment 4 टॉपिक

Specimen preparation - cutting, mounting, grinding, polishing, etching
Microstructure of mild steel, medium carbon steel and cast iron
Annealing, normalising, hardening and tempering
Jominy end-quench hardenability test

परिचय

आप यह कर पाएँगे

Perform tensile and compression tests on a UTM and draw the stress-strain curve
Measure Brinell, Rockwell and Vickers hardness of metals
Find impact strength by Izod and Charpy tests
Determine modulus of rigidity by torsion test and stiffness of a spring
Prepare a metallographic specimen and identify the microstructure of steels and cast irons
Study the effect of heat treatment and hardenability (Jominy test)

यह किसके लिए है

B.Tech Mechanical Engineering students of Semester 3 (AKTU)
Students of other universities studying the same subject who want unit-wise coaching

आपको क्या चाहिए

Strength of Materials / Material Science theory
Basic idea of stress, strain and hardness

सवाल

Which syllabus does the Materials Testing Lab course follow?

It follows the AKTU (Dr. A.P.J. Abdul Kalam Technical University, Lucknow) B.Tech syllabus for Materials Testing Lab. If your own university's syllabus differs, the centre follows your university syllabus.

Will this help in the university examination?

Yes. Experiments are explained with aim, theory, procedure, observation table, calculation and viva questions, so you can write the lab file and face the practical exam confidently.

Which machines are used?

Universal Testing Machine, Brinell / Rockwell / Vickers hardness testers, impact tester, torsion machine and a metallurgical microscope.