Your roadmap · आपका रोडमैप
- 1
Admission & first meetingप्रवेश और पहली मुलाकातEnquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.
- 2
Work planकार्य योजनाStep by step with your guide / trainer.
Module 1: Safety, Joint Preparation and Gas CuttingModule 2: Gas Welding of JointsModule 3: Arc Welding (SMAW) in All PositionsModule 4: MIG/MAG, TIG and Plasma CuttingModule 5: Weld Inspection and Testing
- 3
File, report & vivaफ़ाइल, रिपोर्ट और वाइवाPractical file / report checked, mock viva before the final one.
- 4
Online tests & resultऑनलाइन टेस्ट और रिज़ल्टTake the tests online; your marks and result show in your student login and at the centre.
सिलेबस · पाठ्यक्रम
1 subject · 5 chapters · 16 topics
01Module 1: Safety, Joint Preparation and Gas Cutting
4 टॉपिक+
- PPE and fire safety drill
- Edge preparation by grinding
- Straight and bevel cutting with oxy-acetylene
- Plasma cutting of steel
02Module 2: Gas Welding of Joints
3 टॉपिक+
- Flame setting
- Butt and lap joints on MS sheet
- Gas brazing and bronze welding
03Module 3: Arc Welding (SMAW) in All Positions
3 टॉपिक+
- Striking and maintaining the arc, straight beads
- Fillet joints in 1F, 2F, 3F
- Single-V butt joints in 1G, 2G, 3G, 4G
04Module 4: MIG/MAG, TIG and Plasma Cutting
3 टॉपिक+
- MAG welding of MS fillet and butt joints
- TIG welding of stainless steel
- TIG welding of aluminium sheet
05Module 5: Weld Inspection and Testing
3 टॉपिक+
- Visual inspection with weld gauges
- Dye penetrant test
- Bend and nick-break tests
About this course
आप यह कर पाएँगे
- Prepare plate edges and cut steel by oxy-fuel and plasma cutting
- Gas weld butt, lap and T-joints on thin sheets
- Arc weld butt and fillet joints in flat, horizontal, vertical and overhead positions
- Weld steel, stainless steel and aluminium with MIG/MAG and TIG processes
- Inspect welds visually and with simple tests and identify defects
यह किसके लिए है
- ITI Welder trainees (NCVT / DGT CTS)
- Trainees preparing for the AITT practical exam and welder qualification tests
आपको क्या चाहिए
- Welder trade theory alongside
- Full PPE: welding helmet, gloves, apron and safety shoes
Online tests & result
Practice and unit tests online; marks and result show in your student login and at the centre.
Student login →
सवाल
Which syllabus does this course follow?
The NCVT / DGT CTS (NSQF) Welder Trade Practical syllabus. The centre follows the student's own ITI syllabus where it differs.
Is PPE compulsory?
Yes, no welding is allowed without helmet with correct filter shade, gloves, apron and safety shoes.
How are joints marked?
Each joint is marked on a rubric for preparation, bead appearance, penetration, defects and safety.
