NDSS Academy

Electronics Engineering

Diploma Engineering · Semester 5

6 महीनेअवधि 7Subjects 35Chapters ऑनलाइनTests & result
अभी पूछताछ करें Nearest centre Syllabus PDF

Your roadmap · आपका रोडमैप

  1. 1
    Admission & first meetingप्रवेश और पहली मुलाकात

    Enquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.

  2. 2
    Semester 5 — subject classesसेमेस्टर 5 — विषयवार कक्षाएँ

    Every theory subject of the term, unit by unit, with notes, numericals and doubt classes.

    Microcontroller and Embedded SystemsOptical Fibre CommunicationMobile and Wireless CommunicationControl SystemsElectronic Equipment Maintenance
  3. 3
    Labs, practicals & project workलैब, प्रैक्टिकल और प्रोजेक्ट

    Experiments / jobs / project work as in the syllabus, with practical file and viva preparation.

    Embedded Systems Labसमर इंटर्नशिप
  4. 4
    Unit tests & mid-termयूनिट टेस्ट और मिड-टर्म

    A test after every unit and a mid-term in the university / board pattern.

  5. 5
    Semester 5 mock testमॉक टेस्ट

    A full mock test of all subjects before the exam, with analysis.

  6. 6
    Semester 5 exam (university / board)सेमेस्टर / वार्षिक परीक्षा

    Previous papers, important questions and full revision.

  7. 7
    Online tests & resultऑनलाइन टेस्ट और रिज़ल्ट

    Take the tests online; your marks and result show in your student login and at the centre.

सिलेबस · पाठ्यक्रम

7 subjects · 35 chapters · 152 topics

Microcontroller and Embedded Systems5 chapters · 6 Months Subject page →
01Unit 1: Introduction to Embedded Systems 5 टॉपिक
  1. Definition, characteristics and classification of embedded systems
  2. Hardware and software components
  3. Microprocessor vs microcontroller
  4. Harvard and von Neumann architecture
  5. RISC and CISC
02Unit 2: 8051 Architecture and Programming 5 टॉपिक
  1. 8051 architecture and memory
  2. Addressing modes and instruction set
  3. Timers and counters
  4. Serial communication
  5. Interrupts
03Unit 3: Embedded C Programming 5 टॉपिक
  1. Embedded C data types
  2. Bit-wise operators and port programming
  3. Delay and timer programs in C
  4. Serial port programs in C
  5. Keil IDE and simulation
04Unit 4: ARM Processor Basics 5 टॉपिक
  1. ARM features and versions
  2. ARM7 registers and operating modes
  3. ARM and Thumb instruction sets
  4. Cortex-M series and development boards (STM32 / LPC)
  5. GPIO programming basics
05Unit 5: Interfacing, Protocols and Real-Time Applications 4 टॉपिक
  1. Sensor, LCD, keypad and motor interfacing
  2. UART, I2C and SPI protocols
  3. RTOS: tasks, scheduling, semaphores
  4. Embedded applications and IoT basics
Optical Fibre Communication5 chapters · 6 Months Subject page →
01Unit 1: Introduction and Light Propagation 5 टॉपिक
  1. Advantages and applications of OFC
  2. Block diagram of an OFC system
  3. Optical windows: 850, 1310, 1550 nm
  4. Refraction, Snell's law and total internal reflection
  5. Critical angle, acceptance angle and numerical aperture
02Unit 2: Optical Fibres and Cables 5 टॉपिक
  1. Fibre structure: core, cladding, coating
  2. Step index and graded index fibres
  3. Single mode and multimode fibres; V-number
  4. Fibre materials and fabrication basics
  5. Fibre cables
03Unit 3: Losses and Dispersion 5 टॉपिक
  1. Absorption and scattering losses
  2. Bending losses
  3. Attenuation in dB/km
  4. Intermodal and chromatic dispersion
  5. Bandwidth-distance product
04Unit 4: Optical Sources and Detectors 5 टॉपिक
  1. LED: structure and characteristics
  2. Laser diode: principle and characteristics
  3. PIN photodiode
  4. Avalanche photodiode
  5. Responsivity and quantum efficiency
05Unit 5: Splicing, Connectors and Fibre Optic Links 5 टॉपिक
  1. Fusion and mechanical splicing
  2. Connectors: SC, LC, FC, ST
  3. Couplers and WDM
  4. OTDR and power meter testing
  5. Power budget, FTTH and fibre networks
Mobile and Wireless Communication5 chapters · 6 Months Subject page →
01Unit 1: Cellular Concepts 5 टॉपिक
  1. Evolution of mobile generations 1G-5G
  2. Cell, cluster and frequency reuse
  3. Co-channel interference and reuse distance
  4. Handoff types
  5. Cell splitting, sectoring and trunking
02Unit 2: GSM Architecture 5 टॉपिक
  1. GSM architecture: MS, BTS, BSC, MSC, HLR, VLR, AuC, EIR
  2. SIM and IMEI
  3. GSM frequency bands, TDMA frame and channels
  4. Call set-up procedure
  5. GPRS and EDGE
03Unit 3: Spread Spectrum, CDMA and 3G 5 टॉपिक
  1. Spread spectrum: DSSS and FHSS
  2. Processing gain
  3. CDMA principle and IS-95
  4. Soft handoff
  5. WCDMA / UMTS
04Unit 4: 4G LTE and 5G 5 टॉपिक
  1. LTE architecture: eNodeB and EPC
  2. OFDMA and SC-FDMA
  3. MIMO
  4. VoLTE
  5. 5G NR: eMBB, URLLC, mMTC, mmWave and massive MIMO
05Unit 5: Wireless Networks 5 टॉपिक
  1. Wi-Fi IEEE 802.11 standards
  2. Bluetooth
  3. Zigbee
  4. RFID and NFC
  5. Satellite mobile communication basics
Control Systems5 chapters · 6 Months Subject page →
01Unit 1: Introduction to Control Systems 4 टॉपिक
  1. Open loop and closed loop systems
  2. Effects of feedback
  3. Servomechanisms and regulators
  4. Laplace transform basics
02Unit 2: Transfer Function and Block Diagrams 4 टॉपिक
  1. Transfer function, poles and zeros
  2. Block diagram reduction rules
  3. Signal flow graph and Mason's gain formula
  4. Transfer function of electrical systems
03Unit 3: Time Response Analysis 5 टॉपिक
  1. Standard test signals
  2. First order system response
  3. Second order system: damping ratio and natural frequency
  4. Time domain specifications: rise time, peak overshoot, settling time
  5. Steady state error and error constants
04Unit 4: Stability 4 टॉपिक
  1. Concept of stability
  2. Location of poles and stability
  3. Routh-Hurwitz criterion
  4. Root locus introduction
05Unit 5: Frequency Response and Controllers 4 टॉपिक
  1. Frequency response specifications
  2. Bode plot, gain margin and phase margin
  3. Polar and Nyquist plot basics
  4. P, PI, PD and PID controllers
Electronic Equipment Maintenance5 chapters · 6 Months Subject page →
01Unit 1: Maintenance Concepts and Reliability 4 टॉपिक
  1. Types of maintenance: preventive, corrective, predictive
  2. Reliability, failure rate and bathtub curve
  3. MTBF, MTTR and availability
  4. Maintenance records and documentation
02Unit 2: Testing Instruments and Tools 5 टॉपिक
  1. Digital multimeter and CRO / DSO
  2. Logic probe, logic pulser and IC tester
  3. Soldering and desoldering tools
  4. SMD rework station
  5. ESD precautions
03Unit 3: Fault Finding Techniques 5 टॉपिक
  1. Systematic fault finding approach
  2. Signal tracing and signal injection
  3. Half-split method
  4. Testing resistors, capacitors, diodes and transistors
  5. Common faults and symptoms
04Unit 4: Servicing of Electronic Equipment 4 टॉपिक
  1. SMPS: block diagram and faults
  2. UPS and inverter servicing
  3. LED TV and set-top box faults
  4. Mobile phone and computer peripheral basics
05Unit 5: PCB Design and Fabrication 5 टॉपिक
  1. Types of PCB: single, double and multilayer
  2. PCB materials (FR4) and copper thickness
  3. Layout rules and PCB design software (KiCad / Eagle)
  4. Fabrication: artwork, etching, drilling
  5. SMD assembly
Embedded Systems Lab5 chapters · 6 Months Subject page →
01Development Tools and Board Setup 3 टॉपिक
  1. Keil uVision and Arduino IDE
  2. Board setup and flashing
  3. Simulation and debugging
02GPIO Programs 3 टॉपिक
  1. LED blinking and patterns
  2. Switch input with pull-up
  3. Buzzer and relay control
03Display and Input Interfacing 3 टॉपिक
  1. 7-segment display
  2. 16x2 LCD
  3. 4x4 keypad
04Timers, Interrupts and Serial Communication 4 टॉपिक
  1. Timer delay
  2. External interrupt
  3. PWM generation
  4. UART communication with PC
05Sensor and Motor Interfacing 5 टॉपिक
  1. Temperature sensor using ADC
  2. DC motor speed control using PWM
  3. Stepper motor कंट्रोल
  4. I2C RTC module
  5. Simple IoT data upload
समर इंटर्नशिप5 chapters · 6 Months Subject page →
01Milestone 1: Selection of Organisation and Training Plan 3 टॉपिक
  1. Choosing an organisation: BSNL / telecom, Doordarshan / AIR, railway S&T, electronics manufacturing, service centres
  2. Application and joining letter
  3. Training plan and schedule
02Milestone 2: Industrial Training and Daily Diary 3 टॉपिक
  1. Safety and ESD induction
  2. Daily diary signed by the supervisor
  3. Observation of assembly, testing and maintenance work
03Milestone 3: Technical Study of Systems and Equipment 4 टॉपिक
  1. Block diagram of the system studied
  2. Test equipment used
  3. Assembly, soldering and quality checks
  4. Maintenance and fault records
04Milestone 4: Training Report 3 टॉपिक
  1. Report format: certificate, acknowledgement, contents
  2. Chapters: organisation, systems studied, observations, learning
  3. Diagrams, photographs and references
05Milestone 5: Presentation and Viva 3 टॉपिक
  1. Preparing slides
  2. Presentation of 10 minutes
  3. Viva on the training

About this course

आप यह कर पाएँगे

  • Complete Microcontroller and Embedded Systems syllabus with regular tests
  • Complete Optical Fibre Communication syllabus with regular tests
  • Complete Mobile and Wireless Communication syllabus with regular tests
  • Complete Control Systems syllabus with regular tests
  • Complete Electronic Equipment Maintenance syllabus with regular tests
  • Complete Embedded Systems Lab syllabus with regular tests
  • Complete Summer Internship syllabus with regular tests

यह किसके लिए है

  • Diploma Electronics Engineering students of Semester 5 (BTEUP)
  • Polytechnic students of other boards studying the same subject who want unit-wise coaching

आपको क्या चाहिए

  • Digital Electronics and C programming of earlier semesters
Online tests & result Practice and unit tests online; marks and result show in your student login and at the centre. Student login →

सवाल

Which syllabus does the Microcontroller and Embedded Systems course follow?

It follows the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus for Microcontroller and Embedded Systems (Electronics Engineering, Semester 5). If your own board's or institute's syllabus differs, the centre follows your own syllabus.

Will this help in the semester examination?

Yes. Teaching is unit-wise as per the BTEUP scheme, with previous-year question practice, MCQ tests and doubt sessions before the semester exam.

Which boards are used?

8051 trainer kits / Keil simulator, and Arduino or STM32 boards for ARM and interfacing practice.

Which syllabus does the Optical Fibre Communication course follow?

It follows the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus for Optical Fibre Communication (Electronics Engineering, Semester 5). If your own board's or institute's syllabus differs, the centre follows your own syllabus.

Is FTTH and field testing covered?

Yes. Splicing, connectors, OTDR traces and power budget for FTTH links are explained.

Which syllabus does the Mobile and Wireless Communication course follow?

It follows the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus for Mobile and Wireless Communication (Electronics Engineering, Semester 5). If your own board's or institute's syllabus differs, the centre follows your own syllabus.

Is 5G covered?

Yes. 5G NR features, use cases and architecture are covered at diploma level along with GSM, CDMA and LTE.

Which syllabus does the Control Systems course follow?

It follows the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus for Control Systems (Electronics Engineering, Semester 5). If your own board's or institute's syllabus differs, the centre follows your own syllabus.

Download the syllabus (PDF)

Tell us who you are — your copy is made with your name, and our counsellor can help you choose the right course and centre.

Want to join right away? अभी पूछताछ करें — our centre will call you.