Your roadmap · आपका रोडमैप
- 1
Admission & first meetingप्रवेश और पहली मुलाकातEnquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.
- 2
Work planकार्य योजनाStep by step with your guide / trainer.
CNC Machine Familiarisation and SafetyWork and Tool SettingCNC Turning ProgramsCNC Milling ProgramsSimulation and Verification
- 3
File, report & vivaफ़ाइल, रिपोर्ट और वाइवाPractical file / report checked, mock viva before the final one.
- 4
Online tests & resultऑनलाइन टेस्ट और रिज़ल्टTake the tests online; your marks and result show in your student login and at the centre.
सिलेबस · पाठ्यक्रम
1 subject · 5 chapters · 17 topics
01CNC Machine Familiarisation and Safety
3 टॉपिक+
- Control panel and modes (EDIT, MDI, JOG, AUTO)
- Reference point return
- Safety rules for CNC
02Work and Tool Setting
3 टॉपिक+
- Work offset G54
- Tool length / geometry offsets
- Wear offsets for size correction
03CNC Turning Programs
4 टॉपिक+
- Facing and step turning
- Taper and radius turning
- Stock removal cycle G71
- Grooving and thread cutting cycles
04CNC Milling Programs
4 टॉपिक+
- Contour milling with cutter compensation
- Pocket milling
- Drilling cycles G81 and G83
- Subprograms
05Simulation and Verification
3 टॉपिक+
- Simulation software
- Dry run and single block
- Inspection of the machined part
About this course
आप यह कर पाएँगे
- Operate a CNC lathe and machining centre safely in all modes
- Set work offsets and tool offsets
- Write, simulate and run turning programs with step, taper, radius and threading
- Write and run milling programs for contours, pockets and drilling cycles
- Verify programs with simulation, dry run and single block mode
यह किसके लिए है
- Diploma Mechanical Engineering students of Semester 5 (BTEUP)
- Diploma Production students and ITI Machinist pass-outs
आपको क्या चाहिए
- Theory of CNC Machines and Automation (G and M codes)
Online tests & result
Practice and unit tests online; marks and result show in your student login and at the centre.
Student login →
सवाल
Will I run programs on a real machine?
Yes. After simulation, each program is run on the CNC trainer lathe / mill under supervision.
Which control system is used?
Fanuc-style ISO codes; other controllers available at the centre are also shown.
Is this course based on the BTEUP syllabus?
Yes. The units follow the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus. If your polytechnic follows a different board or a revised scheme, the centre teaches your own syllabus.
