Your roadmap · आपका रोडमैप
- 1
Admission & first meetingप्रवेश और पहली मुलाकातEnquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.
- 2
Part 1 of the syllabusपाठ्यक्रम भाग 1Unit-wise coaching with notes and doubt classes.
Unit 1: Design Philosophies and Limit State MethodUnit 2: Design of Beams for FlexureUnit 3: Shear, Bond, Torsion and Serviceability
- 3
Part 2 of the syllabusपाठ्यक्रम भाग 2Unit-wise coaching with notes and doubt classes.
Unit 4: Design of Slabs and StairsUnit 5: Columns and Footings
- 4
Unit tests & assignmentsयूनिट टेस्टRegular tests in the university / board pattern.
- 5
Semester 6 exam (university / board)विश्वविद्यालय / बोर्ड परीक्षाPrevious papers and full revision before the exam.
- 6
Online tests & resultऑनलाइन टेस्ट और रिज़ल्टTake the tests online; your marks and result show in your student login and at the centre.
सिलेबस · पाठ्यक्रम
1 subject · 5 chapters · 25 topics
01Unit 1: Design Philosophies and Limit State Method
5 टॉपिक+
- Working stress, ultimate load and limit state methods
- Characteristic loads and strengths
- Partial safety factors
- Stress-strain curves and stress block parameters
- Limit states of collapse and serviceability
02Unit 2: Design of Beams for Flexure
5 टॉपिक+
- Singly reinforced rectangular beams
- Balanced, under- and over-reinforced sections
- Limiting moment of resistance
- Doubly reinforced beams
- Flanged (T and L) beams
03Unit 3: Shear, Bond, Torsion and Serviceability
5 टॉपिक+
- Nominal and design shear stress
- Design of shear reinforcement
- Bond and development length
- Design for torsion
- Deflection control and cracking
04Unit 4: Design of Slabs and Stairs
5 टॉपिक+
- One-way slabs
- Two-way slabs (IS 456 coefficients)
- Continuous slabs
- Cantilever slabs
- Staircases
05Unit 5: Columns and Footings
5 टॉपिक+
- Short and slender columns, effective length
- Axially loaded short columns
- Uniaxial and biaxial bending (SP 16 charts)
- Isolated square and rectangular footings
- Detailing as per IS 456 and SP 34
About this course
आप यह कर पाएँगे
- Explain working stress and limit state design philosophies and IS 456 provisions
- Design singly reinforced, doubly reinforced and flanged beams for flexure
- Design for shear, bond, development length and torsion; check deflection and cracking
- Design one-way and two-way slabs and staircases
- Design short and slender columns under axial load and bending
- Design isolated footings and prepare reinforcement details
यह किसके लिए है
- B.Tech Civil Engineering students of Semester 6 (AKTU)
- Students of other universities studying the same subject who want unit-wise coaching
आपको क्या चाहिए
- Structural Analysis and Solid Mechanics
- IS 456:2000 and SP 16 (provided in class)
Online tests & result
Practice and unit tests online; marks and result show in your student login and at the centre.
Student login →
सवाल
Which syllabus does the Design of Concrete Structures course follow?
It follows the AKTU (Dr. A.P.J. Abdul Kalam Technical University, Lucknow) B.Tech syllabus for Design of Concrete Structures. If your own university's syllabus differs, the centre follows your university syllabus.
Will this help in the university examination?
Yes. Teaching is unit-wise as per the AKTU scheme, with previous-year question practice, MCQ tests and doubt sessions before the semester exam.
Is SP 16 and detailing taught?
Yes. Design is done with IS 456 and SP 16 charts, and each design ends with a reinforcement detail sketch as expected in AKTU exams.
