Your roadmap · आपका रोडमैप
- 1
Admission & first meetingप्रवेश और पहली मुलाकातEnquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.
- 2
Semester 3 — subject classesसेमेस्टर 3 — विषयवार कक्षाएँEvery theory subject of the term, unit by unit, with notes, numericals and doubt classes.
Engineering Mathematics-IIITechnical CommunicationPython ProgrammingEngineering MechanicsSurveying and GeomaticsFluid Mechanics
- 3
Labs, practicals & project workलैब, प्रैक्टिकल और प्रोजेक्टExperiments / jobs / project work as in the syllabus, with practical file and viva preparation.
Surveying and Geomatics LabFluid Mechanics LabMini Project or Internship Assessment-I
- 4
Unit tests & mid-termयूनिट टेस्ट और मिड-टर्मA test after every unit and a mid-term in the university / board pattern.
- 5
Semester 3 mock testमॉक टेस्टA full mock test of all subjects before the exam, with analysis.
- 6
Semester 3 exam (university / board)सेमेस्टर / वार्षिक परीक्षाPrevious papers, important questions and full revision.
- 7
Online tests & resultऑनलाइन टेस्ट और रिज़ल्टTake the tests online; your marks and result show in your student login and at the centre.
सिलेबस · पाठ्यक्रम
9 subjects · 45 chapters · 214 topics
Engineering Mathematics-III5 chapters · 6 Months
Subject page →+
01Unit 1: Integral Transforms
6 टॉपिक+
- Fourier integral theorem
- Fourier transform and inverse transform
- Fourier sine and cosine transforms
- Properties and convolution theorem
- Z-transform of standard sequences and its properties
- Inverse Z-transform and solution of difference equations
02Unit 2: Partial Differential Equations
5 टॉपिक+
- Formation of PDE by eliminating constants and functions
- Lagrange's linear equation (Pp + Qq = R)
- Linear PDE of higher order with constant coefficients
- Complementary function and particular integral
- Classification of second-order PDE
03Unit 3: Applications of Partial Differential Equations
5 टॉपिक+
- Method of separation of variables
- One-dimensional wave equation
- One-dimensional heat conduction equation
- Two-dimensional Laplace equation
- Solution of PDE by Fourier transform
04Unit 4: Complex Analysis
5 टॉपिक+
- Analytic functions and Cauchy-Riemann equations
- Conformal mapping and bilinear transformation
- Cauchy's integral formula
- Laurent series and singularities
- Residue theorem and evaluation of real integrals
05Unit 5: Statistical Techniques
6 टॉपिक+
- Moments, skewness and kurtosis
- Correlation and lines of regression
- Curve fitting by the method of least squares
- Binomial, Poisson and normal distributions
- Testing of hypothesis: t-test, chi-square test and F-test
- Statistical quality control charts
Technical Communication5 chapters · 6 Months
Subject page →+
01Unit 1: Fundamentals of Technical Communication
5 टॉपिक+
- Meaning, features and importance of technical communication
- Process and levels of communication
- Flow of communication: downward, upward, horizontal and diagonal
- Barriers to communication
- General vs technical communication
02Unit 2: Forms of Business Correspondence
5 टॉपिक+
- Business letters: parts and formats (block, modified block)
- Job application and resume
- Memo, notice and circular
- Agenda and minutes of meetings
- E-mail writing
03Unit 3: Technical Reports and Proposals
5 टॉपिक+
- Types of reports: informational, analytical, feasibility, progress
- Structure of a formal report: preliminary, main and supplementary parts
- Executive summary
- Technical proposals: types and structure
- Graphics and tables in reports
04Unit 4: Technical Writing Style, Research Papers and Manuals
5 टॉपिक+
- Style: clarity, conciseness, objectivity and accuracy
- Use of passive voice and technical vocabulary
- Research paper structure (IMRaD) and abstract
- Referencing and citation styles (IEEE, APA)
- Instruction manuals and technical descriptions
05Unit 5: Oral Presentation and Non-Verbal Communication
5 टॉपिक+
- Planning and delivering technical presentations
- Audience analysis and use of visual aids
- Handling questions
- Kinesics, proxemics, paralanguage and chronemics
- Seminars and conferences
Python Programming5 chapters · 6 Months
Subject page →+
01Unit 1: Python Basics, Data Types and Operators
6 टॉपिक+
- History and features of Python
- Python interpreter, IDLE and running scripts
- Variables, keywords and identifiers
- Data types: int, float, complex, bool, str
- Operators and precedence
- Input, output and type conversion
02Unit 2: Conditional Statements and Loops
5 टॉपिक+
- if, if-else and if-elif-else
- while loop
- for loop with range()
- break, continue and pass
- Loop else clause and nested loops
03Unit 3: Strings and Functions
6 टॉपिक+
- String indexing, slicing and methods
- String formatting
- Defining and calling functions
- Default, keyword and variable-length arguments
- Lambda functions and recursion
- Variables का scope
04Unit 4: Lists, Tuples, Dictionaries and Sets
5 टॉपिक+
- List operations and methods
- List comprehensions
- Tuples and their immutability
- Dictionaries: keys, values and methods
- Sets and set operations
05Unit 5: File Handling, Exceptions, Modules and Packages
6 टॉपिक+
- Opening, reading and writing files
- File modes and the with statement
- Exceptions: try, except, else, finally
- Raising exceptions
- Modules, packages and the standard library
- Introduction to NumPy and Matplotlib
Engineering Mechanics5 chapters · 6 Months
Subject page →+
01Unit 1: Force Systems and Equilibrium
6 टॉपिक+
- Laws of mechanics and force systems
- Resultant of concurrent and non-concurrent forces
- Moment of a force and Varignon's theorem
- Couples
- Free body diagram
- Equilibrium equations and Lami's theorem
02Unit 2: Friction
6 टॉपिक+
- Laws of dry friction
- Coefficient and angle of friction, angle of repose
- Block on horizontal and inclined planes
- Ladder friction
- Wedge friction
- Belt friction: T1/T2 = e^(mu*theta)
03Unit 3: Centroid and Moment of Inertia
6 टॉपिक+
- Centroid of lines and areas
- Centroid of composite sections
- Area moment of inertia
- Parallel and perpendicular axis theorems
- MI of composite sections
- Mass moment of inertia
04Unit 4: Trusses and Beams
6 टॉपिक+
- Types of trusses, perfect truss condition
- Method of joints
- Method of sections
- Types of beams, supports and loads
- Support reactions
- Shear force and bending moment diagrams
05Unit 5: Dynamics of Particles
5 टॉपिक+
- Rectilinear motion
- Projectile motion
- Newton's laws and D'Alembert's principle
- Work-energy principle
- Impulse-momentum and impact
Surveying and Geomatics5 chapters · 6 Months
Subject page →+
01Unit 1: Fundamentals, Chain and Compass Survey
6 टॉपिक+
- Principles and classification of surveying
- Chain surveying and ranging
- Bearings: WCB and reduced bearing
- Prismatic and surveyor's compass
- Local attraction
- Plane table surveying
02Unit 2: Levelling and Contouring
6 टॉपिक+
- Levelling instruments and terms
- Height of instrument and rise-and-fall methods
- Curvature and refraction corrections
- Profile and reciprocal levelling
- Contours and their characteristics
- Areas and volumes
03Unit 3: Theodolite, Tacheometry and Curves
6 टॉपिक+
- Theodolite and its adjustments
- Measurement of horizontal and vertical angles
- Theodolite traversing and Gale's table
- Tacheometric surveying
- Trigonometric levelling
- Simple circular curves
04Unit 4: Modern Field Survey Systems
5 टॉपिक+
- Electronic distance measurement
- Total station: components and use
- Global Navigation Satellite Systems (GPS / GNSS)
- DGPS and RTK
- Drone / UAV surveying basics
05Unit 5: Photogrammetry, Remote Sensing and GIS
5 टॉपिक+
- Aerial photogrammetry basics and scale
- Remote sensing principles and EMR
- Sensors, platforms and spectral signatures
- Image interpretation and NDVI
- GIS components and data models
Fluid Mechanics5 chapters · 6 Months
Subject page →+
01Unit 1: Fluid Properties and Fluid Statics
6 टॉपिक+
- Density, specific weight, specific gravity
- Viscosity and Newton's law of viscosity
- Surface tension and capillarity
- Pressure and its measurement: manometers
- Hydrostatic forces on plane and curved surfaces
- Buoyancy and metacentric height
02Unit 2: Fluid Kinematics
5 टॉपिक+
- Lagrangian and Eulerian description
- Types of flow: steady, uniform, laminar, turbulent
- Continuity equation
- Stream function and velocity potential
- Streamlines, streaklines and flow net
03Unit 3: Fluid Dynamics and Flow Measurement
6 टॉपिक+
- Euler's equation
- Bernoulli's equation and assumptions
- Venturimeter and orifice meter
- Pitot tube
- Momentum equation and force on bends
- Orifices and mouthpieces
04Unit 4: Dimensional Analysis and Laminar Flow
5 टॉपिक+
- Dimensional homogeneity, Rayleigh and Buckingham pi methods
- Similitude and model laws
- Reynolds number
- Laminar flow through pipes: Hagen-Poiseuille
- Laminar flow between parallel plates
05Unit 5: Turbulent Flow and Flow Through Pipes
6 टॉपिक+
- Turbulent flow and Darcy-Weisbach equation
- Moody diagram
- Minor losses
- Pipes in series and parallel
- Hydraulic gradient and energy lines
- Boundary layer concept
Surveying and Geomatics Lab5 chapters · 6 Months
Subject page →+
01Chain and Compass Survey
4 टॉपिक+
- Ranging and chaining a line
- Chain traverse and offsets
- Bearings with prismatic compass
- Detection and correction of local attraction
02Levelling
4 टॉपिक+
- Temporary adjustment of auto / dumpy level
- Fly levelling by HI and rise-and-fall methods
- Longitudinal and cross-section levelling
- Contouring by grid method
03Theodolite Survey
4 टॉपिक+
- Temporary adjustment of theodolite
- Horizontal angle by repetition and reiteration
- Vertical angle and height of an object
- Theodolite traverse
04Tacheometry
2 टॉपिक+
- Determination of tacheometric constants
- Distance and elevation by stadia method
05Total Station and GPS
4 टॉपिक+
- Setting up and orientation of total station
- Coordinates, traverse and area
- Stake-out of points
- Position fixing with handheld GPS
Fluid Mechanics Lab5 chapters · 6 Months
Subject page →+
01Hydrostatics and Stability
2 टॉपिक+
- Metacentric height of a ship model
- Centre of pressure on a plane surface
02Bernoulli's Theorem
2 टॉपिक+
- Verification of Bernoulli's theorem
- Plotting of total energy line
03Flow Measurement
4 टॉपिक+
- Coefficient of discharge of venturimeter
- Coefficient of discharge of orifice meter
- Hydraulic coefficients Cc, Cv, Cd of an orifice
- Calibration of rectangular and V-notch
04Flow Regimes
2 टॉपिक+
- Reynolds experiment: laminar, transition and turbulent flow
- Calculation of Reynolds number
05Pipe Flow Losses
2 टॉपिक+
- Darcy friction factor of pipes
- Minor losses in bends, sudden expansion and contraction
Mini Project or Internship Assessment-I5 chapters · 6 Months
Subject page →+
01Topic or Internship Selection
3 टॉपिक+
- Identifying an interest area and a guide / industry mentor
- Choosing a feasible mini project topic or internship organisation
- Getting departmental approval
02Synopsis and Planning
4 टॉपिक+
- Problem statement and objectives
- Literature / product survey
- Methodology, tools and resources
- Timeline (Gantt chart) and expected outcomes
03Execution of Work / Training
4 टॉपिक+
- Carrying out design, coding, fabrication, survey or site work
- Daily diary / log book
- Weekly review with guide or mentor
- Testing, observations and results
04Report Writing
4 टॉपिक+
- Report format as per university guidelines
- Certificate, acknowledgement, abstract and contents
- Chapters: introduction, work done, results, conclusion
- References and plagiarism check
05Presentation and Viva
4 टॉपिक+
- Preparing a 10 - 15 minute presentation
- Demonstration of model / software / photographs
- Answering viva questions
- Final assessment by the departmental committee
About this course
आप यह कर पाएँगे
- Complete Engineering Mathematics-III syllabus with regular tests
- Complete Technical Communication syllabus with regular tests
- Complete Python Programming syllabus with regular tests
- Complete Engineering Mechanics syllabus with regular tests
- Complete Surveying and Geomatics syllabus with regular tests
- Complete Fluid Mechanics syllabus with regular tests
- Complete Surveying and Geomatics Lab syllabus with regular tests
- Complete Fluid Mechanics Lab syllabus with regular tests
यह किसके लिए है
- B.Tech second-year students (Semester 3) of Civil, Mechanical, Electrical and Electronics & Communication Engineering under AKTU
- Students who need step-by-step practice of transforms, PDE and statistics numericals
- Lateral-entry diploma holders who need extra support in engineering mathematics
आपको क्या चाहिए
- Engineering Mathematics-I and II
- Scientific calculator and statistical tables
Online tests & result
Practice and unit tests online; marks and result show in your student login and at the centre.
Student login →
सवाल
Which syllabus is followed?
The current AKTU (Dr. A.P.J. Abdul Kalam Technical University, Lucknow) B.Tech syllabus of Engineering Mathematics-III (Semester 3, core branches). If your university or college follows a different syllabus, the centre teaches from your own university syllabus.
Is statistics included?
Yes. Unit 5 covers statistical techniques with practice on tables and real data sets.
Do lateral-entry students get help?
Yes. Needed topics of Mathematics-I and II are revised briefly before the related units.
Will this help with my project report?
Yes. Report structure, abstracts and referencing taught here are used directly for mini project and final project reports.
Is grammar taught?
Common grammar and usage errors in technical writing are corrected through regular writing tasks.
Do I need to know C first?
It helps, but Python is taught from the basics, so beginners can join.
Is coding practice given?
Yes. Every unit includes coding exercises on a computer alongside preparation for the theory paper.
Which syllabus does the Engineering Mechanics course follow?
It follows the AKTU (Dr. A.P.J. Abdul Kalam Technical University, Lucknow) B.Tech syllabus for Engineering Mechanics. If your own university's syllabus differs, the centre follows your university syllabus.
