Your roadmap · आपका रोडमैप
- 1
Admission & first meetingप्रवेश और पहली मुलाकातEnquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.
- 2
Part 1 of the syllabusपाठ्यक्रम भाग 1Unit-wise coaching with notes and doubt classes.
Unit 1: Introduction to Embedded SystemsUnit 2: 8051 Architecture and ProgrammingUnit 3: Embedded C Programming
- 3
Part 2 of the syllabusपाठ्यक्रम भाग 2Unit-wise coaching with notes and doubt classes.
Unit 4: ARM Processor BasicsUnit 5: Interfacing, Protocols and Real-Time Applications
- 4
Unit tests & assignmentsयूनिट टेस्टRegular tests in the university / board pattern.
- 5
Semester 5 exam (university / board)विश्वविद्यालय / बोर्ड परीक्षाPrevious papers and full revision before the exam.
- 6
Online tests & resultऑनलाइन टेस्ट और रिज़ल्टTake the tests online; your marks and result show in your student login and at the centre.
Syllabus · पाठ्यक्रम
1 subject · 5 chapters · 24 topics
01Unit 1: Introduction to Embedded Systems
5 topics+
- Definition, characteristics and classification of embedded systems
- Hardware and software components
- Microprocessor vs microcontroller
- Harvard and von Neumann architecture
- RISC and CISC
02Unit 2: 8051 Architecture and Programming
5 topics+
- 8051 architecture and memory
- Addressing modes and instruction set
- Timers and counters
- Serial communication
- Interrupts
03Unit 3: Embedded C Programming
5 topics+
- Embedded C data types
- Bit-wise operators and port programming
- Delay and timer programs in C
- Serial port programs in C
- Keil IDE and simulation
04Unit 4: ARM Processor Basics
5 topics+
- ARM features and versions
- ARM7 registers and operating modes
- ARM and Thumb instruction sets
- Cortex-M series and development boards (STM32 / LPC)
- GPIO programming basics
05Unit 5: Interfacing, Protocols and Real-Time Applications
4 topics+
- Sensor, LCD, keypad and motor interfacing
- UART, I2C and SPI protocols
- RTOS: tasks, scheduling, semaphores
- Embedded applications and IoT basics
About this course
You will be able to
- Define embedded systems, their characteristics and classification
- Compare Harvard and von Neumann, RISC and CISC architectures
- Program the 8051 in assembly and embedded C for ports, timers, serial port and interrupts
- Explain ARM features, registers, operating modes and the Cortex-M family
- Interface sensors, displays and motors using UART, I2C and SPI
- Explain RTOS concepts and build simple real-time / IoT applications
Who it is for
- Diploma Electronics Engineering students of Semester 5 (BTEUP)
- Polytechnic students of other boards studying the same subject who want unit-wise coaching
What you need
- Digital Electronics and C programming of earlier semesters
Online tests & result
Practice and unit tests online; marks and result show in your student login and at the centre.
Student login →
Questions
Which syllabus does the Microcontroller and Embedded Systems course follow?
It follows the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus for Microcontroller and Embedded Systems (Electronics Engineering, Semester 5). If your own board's or institute's syllabus differs, the centre follows your own syllabus.
Will this help in the semester examination?
Yes. Teaching is unit-wise as per the BTEUP scheme, with previous-year question practice, MCQ tests and doubt sessions before the semester exam.
Which boards are used?
8051 trainer kits / Keil simulator, and Arduino or STM32 boards for ARM and interfacing practice.
