Your roadmap · आपका रोडमैप
- 1
Admission & first meetingप्रवेश और पहली मुलाकातEnquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.
- 2
Work planकार्य योजनाStep by step with your guide / trainer.
Diode CharacteristicsRectifiers and Power SuppliesTransistor and FET CharacteristicsAmplifiersWave Shaping Circuits
- 3
File, report & vivaफ़ाइल, रिपोर्ट और वाइवाPractical file / report checked, mock viva before the final one.
- 4
Online tests & resultऑनलाइन टेस्ट और रिज़ल्टTake the tests online; your marks and result show in your student login and at the centre.
Syllabus · पाठ्यक्रम
1 subject · 5 chapters · 16 topics
01Diode Characteristics
3 topics+
- V-I characteristic of PN junction diode
- V-I characteristic of Zener diode
- LED characteristic
02Rectifiers and Power Supplies
5 topics+
- Half-wave rectifier
- Full-wave centre-tap and bridge rectifiers
- Capacitor filter and ripple factor
- Zener regulator
- IC 7805 / 7812 regulated supply
03Transistor and FET Characteristics
3 topics+
- CE input and output characteristics
- CB characteristics
- JFET drain and transfer characteristics
04Amplifiers
3 topics+
- Single stage CE amplifier: gain and frequency response
- Two stage RC coupled amplifier
- Emitter follower
05Wave Shaping Circuits
2 topics+
- Series and shunt clippers
- Positive and negative clampers
About this course
You will be able to
- Plot V-I characteristics of PN junction, Zener and LED
- Assemble half-wave, full-wave and bridge rectifiers with filters and measure ripple
- Build Zener and IC regulated power supplies
- Plot input and output characteristics of BJT and FET
- Measure gain and frequency response of a CE amplifier
- Observe clipper and clamper outputs on a CRO
Who it is for
- Diploma Electronics Engineering students of Semester 3 (BTEUP)
- Polytechnic students of other boards studying the same subject who want unit-wise coaching
What you need
- Electronic Devices and Circuits theory of the same semester
Online tests & result
Practice and unit tests online; marks and result show in your student login and at the centre.
Student login →
Questions
Which syllabus does the Electronic Devices and Circuits Lab course follow?
It follows the BTEUP (Board of Technical Education, Uttar Pradesh) diploma syllabus for Electronic Devices and Circuits Lab (Electronics Engineering, Semester 3). If your own board's or institute's syllabus differs, the centre follows your own syllabus.
Will this help in the practical examination and viva?
Yes. Every experiment is practised with the aim, circuit, procedure, observation table and result, followed by viva questions as asked in the BTEUP practical exam.
Is the lab file prepared?
Yes. Each experiment is written with aim, apparatus, circuit diagram, observation table, graph and result.
