Your roadmap · आपका रोडमैप
- 1
Admission & first meetingप्रवेश और पहली मुलाकातEnquire at your nearest NDSS centre, meet the teacher, fix the batch time and get your study material.
- 2
Work planकार्य योजनाStep by step with your guide / trainer.
Simulation Software BasicsDC Network TheoremsTransient AnalysisAC AnalysisTwo-Port Networks and Filters
- 3
File, report & vivaफ़ाइल, रिपोर्ट और वाइवाPractical file / report checked, mock viva before the final one.
- 4
Online tests & resultऑनलाइन टेस्ट और रिज़ल्टTake the tests online; your marks and result show in your student login and at the centre.
Syllabus · पाठ्यक्रम
1 subject · 5 chapters · 16 topics
01Simulation Software Basics
3 topics+
- Schematic entry, components and ground
- DC operating point, DC sweep, AC sweep and transient analysis
- Probes, plots and exporting results
02DC Network Theorems
4 topics+
- Verification of KVL and KCL
- Thevenin and Norton theorems
- Superposition theorem
- Maximum power transfer theorem
03Transient Analysis
3 topics+
- RC charging and discharging
- RL circuit step response
- Series RLC step response
04AC Analysis
3 topics+
- Series and parallel resonance
- Frequency response and bandwidth
- Power and power factor in AC circuits
05Two-Port Networks and Filters
3 topics+
- Z and Y parameters by simulation
- First order low pass and high pass filters
- Band pass filter
About this course
You will be able to
- Build and simulate circuits in PSpice / Multisim / MATLAB-Simulink
- Verify KVL, KCL and network theorems by simulation
- Observe transient response of RC, RL and RLC circuits
- Perform AC sweep analysis to study resonance and frequency response
- Find two-port parameters and simulate passive filters
Who it is for
- B.Tech Electrical Engineering students of Semester 3 (AKTU)
- Students of other universities studying the same subject who want unit-wise coaching
What you need
- Basic Electrical Engineering
- Basic computer skills
Online tests & result
Practice and unit tests online; marks and result show in your student login and at the centre.
Student login →
Questions
Which syllabus does the Circuit Simulation Lab course follow?
It follows the AKTU (Dr. A.P.J. Abdul Kalam Technical University, Lucknow) B.Tech syllabus for Circuit Simulation Lab. If your own university's syllabus differs, the centre follows your university syllabus.
Will this help in the university examination?
Yes. Experiments are explained with aim, theory, procedure, observation table, calculation and viva questions, so you can write the lab file and face the practical exam confidently.
Which software is used?
PSpice, Multisim, LTspice or MATLAB-Simulink, as used in your college; free LTspice is enough for practice at home.
