Design of Steel Structures (B.Tech)

Limit state design of steel connections, tension and compression members, beams and roof trusses as per IS 800.

6 महीनेअवधि 5Chapters23टॉपिक

अभी पूछताछ करें

सिलेबस · पाठ्यक्रम

Download PDF

01Unit 1: Introduction and Design Philosophy 4 टॉपिक

Properties of structural steel (E250, E350)
Indian standard rolled sections: ISMB, ISA, ISMC, SHS (IS 808, IS 4923)
Limit state design and partial safety factors
Classification of cross-sections

02Unit 2: Connections 5 टॉपिक

Bolted connections: bearing type bolts
High strength friction grip bolts
Efficiency of joints
Welded connections: fillet and butt welds
Eccentric connections

03Unit 3: Tension Members 4 टॉपिक

Types of tension members
Design strength: gross yielding, net rupture, block shear
Design of angle tension members
Lug angles and splices

04Unit 4: Compression Members 5 टॉपिक

Buckling and effective length
Buckling classes and design compressive stress
Slenderness limits
Built-up columns with lacing and battens
Slab base and gusseted base

05Unit 5: Beams and Roof Trusses 5 टॉपिक

Laterally supported beams: bending and shear
Laterally unsupported beams
Web buckling and crippling
Roof truss loads: dead, live and wind (IS 875)
Design of purlins and truss members

परिचय

आप यह कर पाएँगे

Explain properties of structural steel, Indian standard rolled sections (IS 808) and limit state design as per IS 800:2007
Design bolted (bearing and HSFG) and welded connections
Design tension members for yielding, rupture and block shear
Design compression members, built-up columns with lacing / battens and column bases
Design laterally supported and unsupported beams
Calculate roof truss loads (IS 875) and design purlins and truss members using standard ISA / ISMB sections

यह किसके लिए है

B.Tech Civil Engineering students of Semester 7 (AKTU)
Students of other universities studying the same subject who want unit-wise coaching

आपको क्या चाहिए

Structural Analysis and Solid Mechanics
IS 800:2007, IS 808 and steel tables (provided in class)

सवाल

Which syllabus does the Design of Steel Structures course follow?

It follows the AKTU (Dr. A.P.J. Abdul Kalam Technical University, Lucknow) B.Tech syllabus for Design of Steel Structures. If your own university's syllabus differs, the centre follows your university syllabus.

Will this help in the university examination?

Yes. Teaching is unit-wise as per the AKTU scheme, with previous-year question practice, MCQ tests and doubt sessions before the semester exam.

Which sections are used in design examples?

Only Indian standard sections (ISMB, ISMC, ISA as per IS 808 and SHS / RHS as per IS 4923) are used, exactly as expected in AKTU exams and in practice.