Environmental Engineering Lab (B.Tech)

Physical, chemical and biological tests of water and wastewater.

6 महीनेअवधि 5Chapters14टॉपिक

अभी पूछताछ करें

सिलेबस · पाठ्यक्रम

Download PDF

01Physical Tests 3 टॉपिक

pH and conductivity
Turbidity by nephelometer
Total, dissolved and suspended solids

02Chemical Tests of Water 4 टॉपिक

Total hardness by EDTA
Alkalinity
Chlorides
Fluoride and iron

03Coagulation and Disinfection 2 टॉपिक

Jar test for optimum coagulant dose
Chlorine demand and residual chlorine

04Wastewater Tests 3 टॉपिक

Dissolved oxygen by Winkler method
BOD
COD

05Bacteriological Tests 2 टॉपिक

MPN test for coliforms
Interpretation against standards

परिचय

आप यह कर पाएँगे

Measure pH, turbidity, conductivity and solids in water
Determine hardness, alkalinity, chlorides and fluoride
Find optimum coagulant dose by jar test and chlorine demand / residual chlorine
Determine DO, BOD and COD of wastewater
Perform MPN test for coliforms
Compare results with IS 10500 and CPCB discharge standards

यह किसके लिए है

B.Tech Civil Engineering students of Semester 6 (AKTU)
Students of other universities studying the same subject who want unit-wise coaching
Students who want to revise experiments and viva questions before the practical exam

आपको क्या चाहिए

Environmental Engineering theory of the same semester
Lab coat, gloves and lab record

सवाल

Which syllabus does the Environmental Engineering Lab course follow?

It follows the AKTU (Dr. A.P.J. Abdul Kalam Technical University, Lucknow) B.Tech syllabus for Environmental Engineering Lab. If your own university's syllabus differs, the centre follows your university syllabus.

Will this help in the practical exam and viva?

Yes. Each experiment is explained with its aim, procedure, calculations and result, followed by viva questions and a mock practical.

Is lab safety taught?

Yes. Handling of acids, reagents and glassware is explained before every experiment.